TSG:Diagonal Stitch/Modified French Knot

Back to Stitches List
Back to Directory of Hand Stitches

DIAGONAL STITCH/MODIFIED FRENCH KNOT

Appearance on reverse is shown in oval inset

Directions

Work from right to left on reverse side of the textile. Modify a Diagonal Basting Stitch by having the thread on the front side of the textile go over the warp yarns. Keeping the needle perpendicular to the fabric, stab straight through the Velcro, lining, and textile, but avoid piercing the textile yarns. When needed, secure thread with a Modified French Knot before re-entering the textile. Modified French Knot: Holding thread taut with the left hand, wrap thread around the needle once or twice. Keeping fingers over the wrapped thread, insert the needle into the textile and pull through. (Unlike a true French Knot, this stitch does not begin and end in the same location.)

Comments

The Modified French Knot is used occasionally with a series of Diagonal Stitches. It is used when warps run in the same direction as the row of Diagonal Stitches. Although knots are rarely used in textile conservation, they are often used when securing Velcro to heavy textiles. It is reasoned that if a stitch were to break, a large portion of the stitches could be pulled out by the weight of the textile. Knots are added to guard against this happening.

Possible uses for this stitch

Securing Velcro Heading to Reverse, Top Edge of Heavy Textiles

See also

Diagonal Basting Stitch
Diagonal Stitch/Knot over Previous Stitch

Copyright: 2026. The Textile Wiki pages are a publication of the Textile Specialty Group of the American Institute for Conservation of Historic and Artistic Works.